




The Libec LX5 Tripod With Pan and Tilt Fluid Head and Floor Spreader delivers superior value with an aluminum tripod and a pan and tilt fluid head. It has a maximum height of 5.45′ and a minimum height of 22" (56 cm). It can handle a load of up to 9 lb, and you can trace every motion, start to finish, with its super torque system. The fluid head is equipped with a sliding plate with a sliding range of +/- 1.6". The entire kit weighs 12.1 lb (5.5 kg) lb. The LX5 can operate in a temperature range of -4 to +140°F (-20 to +60°C). This tripod is ideal for small to mid-sized DV and HD video cameras.
General | |
---|---|
Load Capacity | 9 lb (4 kg) |
Maximum Height | 5.45′ (1.66 m) |
Maximum Height w/o Column Extended | N/A |
Minimum Height | 22" (56 cm) |
Folded Length | Not specified by manufacturer |
Leveling Bubble/Illuminated | Not specified by manufacturer |
Ağırlık | 12.1 lb (5.5 kg) |
Head | |
---|---|
Counter Balance System | Fixed |
Quick Release/Wedge Plate | Yes |
Balance Plate | Not specified by manufacturer |
Tilt Drag | Fixed |
Tilt Mesafe | +90/-80° |
Pan Mesafe | 360° |
Legs | |
---|---|
Material | Aluminum |
Head Attachment Fitting | 75 mm ball, plate with 1/4" screw with video pin |
Leg Stages/Sections | 2-stage |
Leg Lock Type | Not specified by manufacturer |
Independent Leg Spread | No |
Spiked/Retractable Feet | No, rubber |
Center Brace | Floor spreader |
Taksit Gösterim Ekranı Başlığı | ||
taksit tutarı | toplam | |
Peşin | - | 0.00 TL |
3 | - | 0.00 TL |
6 | - | 0.00 TL |